Czech English

A-VarioBell analogue doorphone intercom

Produkty : Analog Door Phones

The Alphatech A-VarioBell is a new, modular type of analog door intercom, an analog door entry phone.

A-VarioBell

The Alphatech VarioBell is a family of analog, GSM and IP doorphone intercoms.

List of basic features of A-VarioBell doorphone:

  • Landline, PSTN line, PBX connection to analogue line
  • Powered from analogue line or via 12VAC/DC power supply
  • Modular system from 1 to 87 call buttons, keypad
  • Surface mounted on the wall or flush mounted into the wall
  • IP44 impregnation rate
  • 1.8mm thick alluminum suitable for outdoor use
  • Call buttons with stainless steel cover
  • Info window made of polycarbonate
  • Dialling keypad for calling to extensions or for access control
  • Up to 36 access codes depending on settings
  • First 10 call buttons can be used for entering access codes, too
  • 2 independent relay contacts
  • Day/Night mode - Real time clock integrated for automatic day/night switching
  • Exit button contact
  • Integrated heating of PCB
  • Programming by DTMF dialling or via Windows PC
  • Electronic audio settings (no trimmers setup)
  • Status indication LEDs - line picked up, ringing, call active, door open
  • Optional audio-induction loop for hearing imparied
  • Adjustable acoustic sound signalization of door intercom status

 

Watch short example videos on the youtube channel to understand the basic functionality:

a) pressing the pre-programmed call button

b) entering an external access code via keypad

c) dialling an extension number via keypad

d) pressing the pre-programmed call button and entering an internal access code to open the door

e) entering an external access code via call buttons

f) calling the doorphone from an extension

g) two groups of numbers - when there is no answer, the doorphone calls to the second number

h) cancel the call by pressing the "C" button on the keypad

i) cancel the call by pressing the same call button again

j) entering and cancelling the programming mode

 

Download:

VarioBellset program for Windows PC

USB driver for "212124 PC USB programming cable" for analog doorphones - 32/64bit (WXP, Vista, W7, W8, W10)

 V3.6 - A-VarioBell firmware, 14.02.2018, correction of mode 3+4, which did not hang up. Make sure to use the latest version of VarioBellset program for Windows PC 

 

 

Associated products from VarioBell family:

The "GSM VarioBell" is a cellular based version of the VarioBell doorphone intercom:

http://www.alphatechtechnologies.cz/en/products/gsm-door-phones/gsm-door-intercom-variobell/ 

 The "IP VarioBell" is a SIP based VoIP version of the VarioBell doorphone intercom: 

http://www.alphatechtechnologies.cz/en/products/voip-door-phones/ip-door-entry-phone-station-ip-variobell/ 

 

 

A-VarioBell analogue doorphone intercom

Produkty : Analog Door Phones

Downloads:

A-VarioBell analog door intercom ppt presentation

A-VarioBell analog door entry intercom datasheet

A-VarioBell analog door intercom user´s guide

USB driver for "212124 PC USB programming cable" for analog doorphones - 32/64bit (WXP, Vista, W7, W8, W10)

System audio tones of analog doorphone

 

A-VarioBell firmware:

First of all, install new VarioBellset program for Windows PC - for firmware V3.4 and higher

V3.6 - 14.02.2018, correction of mode 3+4, which did not hang up. Make sure to use the latest version of VarioBellset program for Windows PC 

V3.4 - 7.2.2017, a new feature. When you set the keypad to "dialling from memory", you can dial numbers stored in memories 1-10 just with single digits 1-0

(previously you had to dial two digits 01, 02, etc. Now you can dial either 01, 02, 03 or also 1, 2, 3, and so on).

 

Step-by-step FW upgrade process:

For a FW upgrade you need to use A-VarioBell pc programming software, USB driver, 212124 PC USB programming cable - see links above

1. Disconnect the A-VarioBell doorphone from the analog line

2. Connect the 212124 PC USB programming cable to A-VarioBell and your PC

2. Download, unzipp and install A-VarioBell pc programming software (VarioBellset program for Windows PC) and USB driver to your PC - see links above

3. Start the "VarioBell setup" program

4. In the menu Option - Firmware upgrade - choose the file with FW (an unzipped file *.HEX)

6. Connect the analog line to the A-VarioBell doorphone

7. Start the FW upgrade

8. In about 10 minutes the FW upgrade is finished. You must see a message "upgrade is successful" and hear the reset system audio tone as a confirmation.

9. In case any error happens during the FW upgrade, disconnect the doorphone from the line, restart the VarioBell setup program and repeat steps  4.-8. 

 

Example videos:

Watch short example videos on the youtube channel to understand the basic functionality:

a) pressing the pre-programmed call button

b) entering an external access code via keypad

c) dialling an extension number via keypad

d) pressing the pre-programmed call button and entering an internal access code to open the door

e) entering an external access code via call buttons

f) calling the doorphone from an extension

g) two groups of numbers - when there is no answer, the doorphone calls to the second number

h) cancel the call by pressing the "C" button on the keypad

i) cancel the call by pressing the same call button again

j) entering and cancelling the programming mode

Quote analog door intercom variobell







Opište:



O nás

- Profil
- Kontakty

Kontakt

ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88
140 00 Praha 4

(c) 2019 ALPHATECH TECHNOLOGIES s.r.o. Mapa stránek | Webdesign ABweb.cz