Czech English

Analog video door entry phone station A-Bell

Produkty : Analog Door Phones

  • Analog video door entry phone station A-Bellrobust door entry phone station which can be installed both outdoors and indoors
  • system capacity from 1 to 98 buttons by using Bell-8 expansion module 
  • the front plate in made in anodised extruded alluminium and ABS plastic
  • name holders are back lit in original blue colour for easy identification even in poor lighting conditions
  • 30mm thin profile
  • surface mounted therefore extremely easy to install
  • optional flush mounting installation box including rain hood
  • IP44 rating
  • optional analog colour camera built-in with infra-LEDs illumination
  • connection to any analog PSTN line or analog extension line of PBX
  • options for single pushbutton which places a call to one number/group or two pushbuttons which can different numbers/groups
  • pushbuttons with a memory for 2 different numbers/groups
  • automatic call forwarding to the second stored number (e.g. GSM number) when the first dialled number (e.g. extension line inside the building) is busy or not answering
  • easy to program - remote programming via analog telephone by DTMF tones or user friendly programming via USB on PC
  • easy to use - handsfree communication powered by the telephone line only
  • pushbuttons can be used as a codelock with access passwords
  • Real Time Clock (RTC) - automatic day/night switching or manually by code
  • one or two internal relays controlled by DTMF tones to control door openers or lights 

A-Bell setup program for Windows PC

USB driver for "212124 PC USB programming cable" for analog doorphones - 32/64bit (WXP, Vista, W7, W8, W10)

V3.3 , 14.02.2018 A-Bell firmware

 

Download

A-Bell datasheet

A-Bell manual

Bell-8 expansion module - a connection guide

USB driver for "212124 PC USB programming cable" for analog doorphones - 32/64bit (WXP, Vista, W7, W8, W10)

A-Bell setup program for Windows PC

 

A-Bell firmware

First of all, install the new  A-Bell setup program for Windows PC

V3.3 , 14.02.2018 bug fix, icomming calls shorter than 5sec. in section "two groups of numbers" must not cause redialling

V3.0 19.2.2016 Support of fast busy signal (e.g. Alcatel, Panasonic PBX)

Step-by-step FW upgrade process:

For a FW upgrade you need to use A-Bell pc programming software, USB driver, 212124 PC USB programming cable - see links above

1. Disconnect the A-Bell doorphone from the analog line

2. Connect the 212124 PC USB programming cable to A-VarioBell and your PC

2. Download, unzipp and install A-Bell pc programming software (A-Bell setup) and USB driver to your PC - see links above

3. Start the "A-Bell setup" program

4. In the menu Option - Firmware upgrade - choose the file with FW (an unzipped file *.HEX)

6. Connect the analog line to the A-Bell doorphone

7. Start the FW upgrade

8. In about 10 minutes the FW upgrade is finished. You must see a message "upgrade is successful" and hear the reset system audio tone as a confirmation.

9. In case any error happens during the FW upgrade, disconnect the doorphone from the line, restart the VarioBell setup program and repeat steps  4.-8. 

Quote analog door phone station a-bell







Opište:



O nás

- Profil
- Kontakty

Kontakt

ALPHATECH TECHNOLOGIES s.r.o.
Jeremenkova 88
140 00 Praha 4

(c) 2019 ALPHATECH TECHNOLOGIES s.r.o. Mapa stránek | Webdesign ABweb.cz