Downloads
BlueGate Brave Analog gsm gateway
The BlueGate Brave Analog is a GSM gateway is equipped with a large number of programmable functions that increase users´ comfort. Using the Telit GL865 module inside, it is designed for 850/900/1800/1900MHz GSM networks.
- By connecting to your PBX, it allows you to call all branches via the GSM network, incoming calls can use the DISA dial-up
- SMS programming function when used with the emergency lift - elevator - intercoms. An optional feature, upon request only.
- Changing the polarity of the telephone line during a call allows exchanges to accurately detect the establishment and termination of a connection
- CLIP supports the most common standard
- Pseudo-tariffing allows you to monitor the actual length of the call (1st charging pulse only after the call is picked up by the other party) the gsm gateway
- The signal in minute intervals to the call allows you to distinguish the GSM connection from the normal call
- The monitoring system allows sending an SMS to a preset number in the event of a power failure, network login, set a number of rings without answering (the called party/device does not respond to the ringing), etc.
- Direct Call (Baby Call) - automatic dialing of the number stored on the SIM immediately after picking up the handset at the phone connected to the gateway
- CE declaration of conformity
- Dimensions 100mm x 130mm × 37mm
- Power supply 8-12VAC / DC, 500 mA
- Additional backup battery for about 12 hours of operation
- BlueGate A Brave has the characteristics of a regular state line
- Operation on frequencies 850/900/1800/1900Mhz
- Additional USB interface for use as a GSM modem (data, SMS with SMS-Mail, etc.)
- Setting gateway parameters both by phone and computer (via USB accessory)
- Tariff 16/12 kHz
- CLIP FSK
- DTMF tone selection t> 30 ms
- Polarity change on the line when establishing/terminating a connection
- Backward compatibility with MiniGate
- 9 memories for allowed call directions
- DTMF INBAND / OUTBAND
- Enable / Disable roaming
- Call time limit
- Timestamps in a call
- Sending the set SMS to the preset number when the power drops below the specified limit, lasting longer than the specified time
- Sending the set SMS to the default number every time the gateway logs in to the GSM network
- Sending the set SMS to the preset number when the gateway rings more than the set number (upon incoming call) without answering
- Sending the set SMS to the preset number when the input changes lasting longer than the set time (additional extension - input board)
- Periodic sending of status SMS in the set interval of 1-30 days. The SMS contains the time and date of sending (time set on the gateway clock - local / GSM), GSM network status, power supply voltage, GSM module temperature, last dialed number. (additional extension - program in the gateway)